Urecon Pre-Insulated Pipe
Urecon's U.I.P.® processed pipe is insulated with rigid polyurethane foam, the best insulation commercially available on the market today. Founded in 1969, Urecon has been pre-insulating various types of core pipe with it's void free U.I.P.® insulation process since 1972. With our system, the pipe is pre-insulated in our factory and arrives on the job site ready to install.
Urecon's patented insulation process ensures a homogenous, void free layer of rigid polyurethane foam insulation, bonded directly to the entire pipe surface. Our insulation system may be applied to virtually any type of pipe on the market today, from 13mm (1/2") to 600mm (24")+ in diameter, with or without electric tracing conduit. Millions of meters of Urecon pre-insulated pipe have been installed for both freeze prevention (often with our THERMOCABLE® electric tracing system) in cold climates; centrally chilled water piping systems in temperate and tropical climates; and hot water / low pressure steam piping for process and district energy. With the proper outer protective jacket, our pipes may be installed either buried or above ground.
In any extreme climate, Urecon pre-insulated pipe is the system of choice.
For low temperature hot water district heating piping systems (in North America), Urecon represents LOGSTOR of Denmark. LOGSTOR is a world class manufacturer of pre-insulated steel pipe systems for district heating applications (maximum service temperature 140oC (284oF)).
[ Intro Page ] [ Français ] [ Español ]