Services

Urecon Pre-Insulated Type K Copper Water Service Pipe (Soft or Hard)
Dimensions 13 mm (½ in) to 75 mm (3 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. Type K Copper Water Service Pipe
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 50 mm 2 in mm in mm in kg/m lbs/ft
13 0.5 16 0.625 133 5.25 13.4 0.527 1.24 0.049 1.95 1.31
19 0.75 22 0.875 133 5.25 18.9 0.745 1.65 0.065 2.38 1.60
25 1 29 1.125 133 5.25 25.3 0.995 1.65 0.065 2.66 1.79
38 1.5 41 1.625 156 6.13 37.6 1.481 1.83 0.072 3.77 2.53
50 2 54 2.125 165 6.50 49.8 1.959 2.11 0.083 5.03 3.38
64 2.5 67 2.625 181 7.13 61.8 2.435 2.41 0.095 6.49 4.37
75 3 79 3.125 197 7.75 73.8 2.907 2.77 0.109 7.76 5.22
  1. Insulation thickness for freeze protection: 50 mm (2 in); other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Insulated pipe available in lengths of 3.66 m (12 ft), 6.7 m (22 ft) or 10 m (33 ft).
  4. Insulation cut back: 150 mm (6 in) for up to 37 mm (1½ in) dia. and 225 mm (9 in) for 50 mm (2 in) dia. and larger.
  5. Each pipe length shipped with suitable insulation kit for joint (unless advised otherwise).
  6. Reference specifications (core pipe): ASTM B88, CSA HC-76

Urecon Pre-Insulated DR 11 (Series 160) HDPE IPS Water Service Pipe
Dimensions Iron Pipe Size (IPS) 19 mm (¾ in) to 50 mm (2 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. Type K Copper Water Service Pipe
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 50 mm 2 in mm in mm in kg/m lbs/ft
19 0.75 27 1.060 133 5.25
20.8 0.82 3.05 0.12 1.03 0.70
25 1 34 1.349 133 5.25 26.7 1.05 3.81 0.15 1.13 0.76
32 1.25 45 1.774 133 5.25 35.1 1.38 5.08 0.20 1.26 0.85
40 1.5 52 2.070 155 6.13 40.9 1.61 5.84 0.23 1.46 0.98
50 2 67 2.657 165 6.50 52.6 2.07 7.62 0.30 1.74 1.17
  1. Insulation thickness for freeze protection: 50 mm (2 in); other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Pressure rating of DR 11 HDPE is 1103 kPa (160 psi) at 23°C (73.4°F).
  4. Insulated pipe available in standard lengths of 12.19 m (40 ft); other lengths available on request.
  5. Insulation cut back: 150 mm (6 in), unless otherwise specified.
  6. Each pipe length shipped with suitable insulation kit for butt fused joint (unless advised otherwise).
  7. Data may vary slightly from one pipe manufacturer to another.
  8. Stainless steel inserts must be used with IPS compression couplings and adapters.
  9. Reference specifications (core pipe), CSA B137.1

Urecon Pre-Insulated DR 11 (SERIES 160) HDPE CTS Water Service Pipe
Dimensions Iron Pipe Size (IPS) 19 mm (¾ in) to 50 mm (2 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. HDPE DR 11, 1103 kPa (160 psi) CTS Dimension
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 50 mm 2 in mm in mm in kg/m lbs/ft
19 0.75 22 0.875 133 5.25
17.0 0.67 2.46 0.09 1.03 0.70
25 1 28 1.125 133 5.25 21.9 0.86 3.15 0.12 1.13 0.76
32 1.25 35 1.375 133 5.25 26.8 1.05 3.88 0.15 1.26 0.85
40 1.5 41 1.625 155 6.13 31.6 1.24 4.60 0.18 1.46 0.98
50 2 54 2.125 165 6.50 41.4 1.63 5.97 0.23 1.74 1.17
  1. Insulation thickness for freeze protection: 50 mm (2 in); other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Pressure rating of DR 11 HDPE is 1103 kPa (160 psi) at 23°C (73.4°F).
  4. Insulated pipe available in standard lengths of 12.19 m (40 ft); other lengths available on request.
  5. Insulation cut back: 150 mm (6 in), unless otherwise specified.
  6. Each pipe length shipped with suitable insulation kit for butt fused joint (unless advised otherwise).
  7. Data may vary slightly from one pipe manufacturer to another.
  8. Stainless steel inserts must be used with IPS compression couplings and adapters.
  9. Reference specifications (core pipe), CSA B137.1

Urecon Pre-Insulated DR 17 (Series 100) HDPE Duct
Dimensions 40 mm (1.5 in) to 150 mm (6 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. DR 17, 690 kPa (100 psi)
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 40 mm 1.5 in 50 mm 2 in mm in mm in kg/m lbs/ft
40 1.5 48 1.90
139
5.50
155
6.13
42.16 1.66 2.79 0.11 1.10 0.74
50 2 60 2.375 155 6.13 165 6.50 52.83 2.08 3.55 0.14 1.34 0.90
75 3 88 3.50 171 6.75 196 7.75 77.72 3.06 5.33 0.21 2.35 1.58
100 4 114 4.50 196 7.75 228 9.00 100.07 3.94 6.86 0.27 3.53 2.37
150 6 168 6.625 247 9.75 279 11.00 147.32 5.80 9.91 0.39 6.52 4.38
  1. Insulation thickness for freeze protection: 50 mm (2 in); other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Pressure rating of DR 17 HDPE duct is 690 kPa (100 psi) at 23°C (73.4°F).
  4. Insulated duct available in standard industry lengths of 12.19 m (40 ft) and 15.24 m (50 ft);
    other lengths available on request.
  5. Insulation cut back: Consult your Urecon representative for your application requirements.
  6. Each duct length shipped with suitable insulation kit for butt fused or heat shrink tube joint.
  7. Reference specifications (core pipe): ASTM D3035, CSA B137.1

Urecon Pre-Insulated SDR 26 (Series 160) PVC Duct
Dimensions 40 mm (1.5 in) to 150 mm (6 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. Series 160, 1103 kPa (160 psi), DR 26
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 40 mm 1.5 in 50 mm 2 in mm in mm in kg/m lbs/ft
40 1.5 48 1.90 127 5.00 155 6.13 44 1.74 2.03 0.080 1.98 1.33
50 2 60 2.38 139 5.50 165 6.50 56 2.19 2.31 0.091 2.17 1.46
75 3 89 3.50 171 6.75 196 7.75 82 3.22 3.43 0.135 3.23 2.17
100 4 114 4.50 196 7.75 228 9.00 105 4.13 4.39 0.173 4.54 3.05
150 6 168 6.63 247 9.75 279 11.00 155 6.09 6.48 0.255 7.85 5.28
  1. Insulation thickness for freeze protection: 50 mm (2 in); other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Pressure rating of DR 26 PVC duct is 1103 kPa (160 psi) at 23°C (73.4°F).
  4. Insulated duct available in standard industry lengths of 6.1 m (20 ft).
  5. Insulation flush with bell end, cut back to insert depth on spigot end.
  6. Each duct length shipped with sufficient heat shrink wrap or H.D.P.E. tape to seal the insulation joint seam.
  7. Reference specifications (core pipe): ASTM D2241, CSA B137.3

Urecon Pre-Insulated PVC Sewer Pipe DR 35
Dimensions 100 mm (4 in) to 150 mm (6 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. DR 35
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 50 mm 2 in mm in mm in kg/m lbs/ft
100 4 107 4.22 229 9.00 100 3.97 3.06 0.125 3.84 2.58
135 5 143 5.64 248 9.75 135 5.31 4.10 0.161 4.83 3.49
150 6 160 6.28 279 11.00 150 5.92 4.57 0.180 6.28 4.22
  1. Insulation thickness for freeze protection: 50 mm (2 in) minimum; other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Standard industry lengths of 4 m (13 ft).
  4. Data and size availability may vary from one manufacturer to another.
  5. Insulation flush with bell end, cut-back to insertion depth on spigot end.
  6. Each duct length is shipped with sufficient heat shrink wrap on HDPE tape to seal the insulation joint seam.
  7. Reference specifications (core pipe): ASTM D3034, CSA B182.2., NQ3624-130 and NQ3624-135.

Urecon Pre-Insulated PVC Sewer Pipe DR 28
Dimensions 100 mm (4 in) to 150 mm (6 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. DR 28
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 50 mm 2 in mm in mm in kg/m lbs/ft
100 4 107 4.22 229 9.00 99 3.91 3.81 0.150 4.13 2.78
125 5 143 5.64 248 9.75 133 5.24 5.11 0.201 6.20 4.17
150 6 160 6.28 279 11.00 148 5.83 5.69 0.224 7.05 4.74
  1. Insulation thickness for freeze protection: 50 mm (2 in) minimum; other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Standard industry lengths of 4 m (13 ft).
  4. Data and size availability may vary from one manufacturer to another.
  5. Insulation flush with bell end, cut-back to insertion depth on spigot end.
  6. Each duct length is shipped with sufficient heat shrink wrap on HDPE tape to seal the insulation joint seam.
  7. Reference specifications (core pipe): ASTM D3034, NQ3624-130 and CSA B182,2.

Urecon Pre-Insulated HDPE Core Sewer Pipe DR 26
Dimensions 19 mm (¾ in) to 500 mm (20 in)

Nominal
Pipe Size
Outside
Pipe Dia.
Insulation O.D. DR 26, 441 kPa (64 psi)
Insulation Thickness Avg. Pipe I.D. Min. Wall Thickness Total Weight
mm in mm in 50 mm 2 in mm in mm in kg/m lbs/ft
75 3 88 3.50 196 7.75 81.50 3.21 3.56 0.14 1.89 1.27
100 4 114 4.50 228 9.00 104.90 4.13 4.32 0.17 2.77 1.86
150 6 168 6.625 279 11.00 154.43 6.08 6.60 0.26 4.88 3.28
200 8 219 8.625 336 13.25 201.17 7.92 8.38 0.33 7.68 5.16
250 10 273 10.75 393 15.50 250.70 9.87 10.41 0.41 11.27 7.57
300 12 324 12.75 438 17.50 297.43 11.71 12.45 0.49 15.21 10.22
  1. Insulation thickness for freeze protection: 50 mm (2 in) minimum; other thicknesses available on request.
  2. Jacketing: 1.27 mm (50 mils) thick polyethylene; other types and thicknesses available on request.
  3. Pressure rating of DR 26 is 441 kPa (64 psi) at 23°C (73.4°F).
  4. Insulated pipe available in standard industry lengths of 12.19 m (40 ft) and 15.24 m (50 ft);
    other lengths available on request.
  5. Insulation cut back: standard 230 mm (9 in); Consult your Urecon representative for your application requirements.
  6. Each pipe length shipped with suitable insulation kit for butt fused joint (unless advised otherwise).
  7. Data may vary slightly from one pipe manufacturer to another.
  8. Reference specifications (core pipe): see HDPE pipe specifications.